Jampro’s Dual Dipole Broadcast Panel mounts on a broadcast tower at a suitable height. It also has three flat panels arranged on a triangular tower. Each panel is 120 degrees wide and two meters long. This antenna design also allows for an omnidirectional signal.
- Excellent coverage from your
Also, assuming the tower is 100m on a hill or mountain, it broadcasts to a large area. Moreover, it will ensure a strong reception for listeners within its range. - Multiple Radio channels:
The Dual Dipole Broadcast Panel antenna design allows several high-power FM radio channels to transmit simultaneously. It will be fed from a Combiner, where, e.g. three or four transmitters will feed into this antenna. - Flexible Placement: The antenna allows vertical or horizontal polarization. If required, Jampro can also offer customised tower mounting brackets.
- Moreover, this antenna provides a high-performance FM system for broadcasters.!
Technical Specifications for the Dual Dipole Broadcast Panel
- Frequency Range: 87.5 – 108 MHz
- Polarisation : Vertical/Horizontal
- Power Rating – according to the input connector
- 1 5/8” EIA:18.8kW
- 7/8” EIA: 5 kW
- 7.16 DIN: 3.8 kW
- Input Impedance: 50 Ohm
- VSWR: 1.1:1
- Gain (relative to halfway dipole): 7.5dB
- Lightning Protection: DC Grounded
- Construction: Hot Dip Galvanised Steel
- Ice Protection: GRP feed point cover
- Weight: 104 kg
- Aerodynamic Wind Area front: 1.4 m/sq
- Side: 0.55 m/sq
- Packed Weight: 148 kg
Finally, please call or leave a message via our Contact Us page for more information.
Datasheet